Roof Top Stick Reflect top layer
Reflective self-adhesive roofing membrane
A high-quality self-adhesive roofing membrane for gently pitched roofs with a minimum pitch of 2° that ensures a waterproof roof. Its self-adhesive nature eliminates the need for cold glue or torching. It has a peel-off film, making installation quick and easy. This top layer is made from high-quality elastomers and bitumen and has a polyester-glass combination insert. This makes the roll tear- and shrink-resistant. The unique composition of the bitumen makes this top layer strong, elastic and easy to work with. This top layer is finished with light-coloured slate granules for additional UV protection. The very light-coloured slate granules have a reflective effect, so your roof stays cooler. This extends the life of your roof and increases the efficiency of your solar panels.
- Quick and easy to apply
- Safe installation
- Resistant to extreme weather conditions
Step-by-step plan 
Product Calculator 
Accessories 
Technical features 
Related products
Step-by-step plan
- First remove all dust and grease from the substrate. In the case of renovation, repair any blisters, cracks and tears in the weathered bitumen substrate with elastic ROOF REPAIR REGULAR. Reinforce with ANTI-CRACK, a tear-resistant polyester fleece.
- Place the ROOF TOP STICK REFLECT on the roof surface. Always start at the lowest point of the roof, i.e. the side with the rainwater outlet. Lay the ROOF TOP STICK REFLECT in the same direction as the underlay or the existing roof covering used as an underlay, but staggered by 50 cm. To achieve this, halve the width of the first roll of roofing membrane.
- Unroll it to check the alignment. Then roll the ROOF TOP STICK REFLECT back up halfway. Apply ROOF PRIMER STICK ACTIVATOR to the substrate where the roofing membrane will be installed to ensure good adhesion. Wait until the ROOF PRIMER STICK ACTIVATOR is dry to the touch (5 to 10 minutes).
- Carefully cut through the film without damaging the roll. Remove the peel-off film from the ROOF TOP STICK REFLECT and firmly press the underlay onto the substrate. Press from the inside to the outside so that no air is trapped during unrolling. Press the seams well with a seam roller. Repeat with the other half of the roll.
- When installing the next roll of roofing, ensure an 8 cm overlap lengthwise. Cut the roll to size, roll it back up halfway, remove the peel-off film from the seams, remove the peel-off film from the roll and stick it using the same method.
- Ensure a 15 cm overlap in the width (the end seams between the rolls). Make sure the end seams are staggered relative to the underlying and adjacent roofing membranes.
- Finish the upstands with strips of ROOF TOP STICK REFLECT. First apply ROOF PRIMER STICK ACTIVATOR to the upstands to ensure optimum adhesion. Wait until the ROOF PRIMER STICK ACTIVATOR is dry to the touch (5 to 10 minutes). Then apply the strips of ROOF TOP STICK. Ensure that the strips extend at least 10 cm onto the roof surface. First cover the upstands with strips.
Documents
Calculate how much product you need
* By using this calculation module, one agrees to the terms of use: All results are indicative and approximate only. Aquaplan can in no way be held responsible for deviating results resulting from the use of this calculation module.
Accessories
Technical features
| Dimensions | 600 × 100 × 0,4 cm |
|---|---|
| Variation | Roof Top Stick Reflect 6 m |
| EAN | 5413466954650 |
| Volume | 6 |
| Material | Elastomeric bitumen (SBS) |
| Product use | Waterproofing for flat and pitched roofs |
| Expected lifespan (in years) | 35 |
| Thickness (mm) | 4.2 |
| Width (mm) | 1000 |
| Surface area (m²) | 6 |
| Installation method | Fully self-adhesive, Pretreated with primer |
| Length (mm) | 6000 |
| Top finish | White slate |
| Content indication | M²/Roll |
Related products
Onze cookies zijn waterdicht
Functioneel Always active
De technische opslag of toegang is strikt noodzakelijk voor het legitieme doel het gebruik mogelijk te maken van een specifieke dienst waarom de abonnee of gebruiker uitdrukkelijk heeft gevraagd, of met als enig doel de uitvoering van de transmissie van een communicatie over een elektronisch communicatienetwerk.
Voorkeuren
De technische opslag of toegang is noodzakelijk voor het legitieme doel voorkeuren op te slaan die niet door de abonnee of gebruiker zijn aangevraagd.
Statistieken
De technische opslag of toegang die uitsluitend voor statistische doeleinden wordt gebruikt.
De technische opslag of toegang die uitsluitend wordt gebruikt voor anonieme statistische doeleinden. Zonder dagvaarding, vrijwillige naleving door uw Internet Service Provider, of aanvullende gegevens van een derde partij, kan informatie die alleen voor dit doel wordt opgeslagen of opgehaald gewoonlijk niet worden gebruikt om je te identificeren.
Marketing
De technische opslag of toegang is nodig om gebruikersprofielen op te stellen voor het verzenden van reclame, of om de gebruiker op een website of over verschillende websites te volgen voor soortgelijke marketingdoeleinden.