Home Products Coatings Roof coatings Roof Renew
0

Roof Renew

Flexible fiber reinforced maintenance coating

A waterproof coating that is extra-reinforced with microfibres. Suitable for seamlessly repairing and renovating new roofs, pitched roofs, old and damaged roofs and gutters. The coating also has excellent expansion and contraction capacity without cracking for a lasting renovation.

  • Extends the life of the existing roof covering
  • Repairs, renews and maintains flat roofs and gutters
  • Not temperature-sensitive, repairs are possible in frosty conditions
Find points of sale

Step-by-step plan

  1. First remove all dust and grease from the substrate. Take the type of roof covering into account.
  2. Repair blisters, cracks and tears with ROOF REPAIR REGULAR or the elastic ROOF SEAL MASTIC SBS sealant. If necessary, reinforce with ANTI-CRACK, a tear-resistant polyester tape. Allow to dry sufficiently (about one week) before proceeding.
  3. Clean and impregnate the substrate with quick-drying ROOF PRIMER ROOFING bonding varnish to ensure optimum adhesion.
  4. Apply two cross coats of ROOF RENEW with a brush. Use about 0.5 kg/m² per coat with an interval of 24 hours. Slate granules can be sprinkled into the last wet coat for additional UV protection.

Documents

Manual
Safety sheet

Calculate how much product you need

Step 1 of 2

  • cm
  • cm
* By using this calculation module, one agrees to the terms of use: All results are indicative and approximate only. Aquaplan can in no way be held responsible for deviating results resulting from the use of this calculation module.

Technical features

Dimensions 11,1 × 11,1 × 13,2 cm
Variation

Roof Renew 1 kgRoof Renew 4 kgRoof Renew 4 kg + 20%Roof Renew 20 kg + 2 kg
EAN

5413466380305541346694011054134669401275413466019168
Volume

14.84.822
Color

BlackBlackBlackblack
Content indication

KGKGKGKG
Material

BitumenBitumenBitumenBitumen
Product use

renovaterenovaterenovaterenovate
Required tools

brush or rollerbrush or floor squeegeebrush or floor squeegeebrush or roller
Minimum processing temperature

5555
Maximum processing temperature

35353535
Dry time (in hours)

24242424
Repaintable

FalseFalseFalseFalse
Repaintable after (hours)

Niet van toepassingNiet van toepassingNiet van toepassingNiet van toepassing
Suitable for part of building

Flat roofsFlat roofsFlat roofsFlat roofs

Safety features

H-phrases H226 - Flammable liquid and vapour.
H336 - May cause drowsiness or dizziness.
P-phrases P102 - Keep out of reach of children.
P210 - Keep away from heat/sparks/open flames/hot surfaces and other ignition sources. - Do not smoke.
P241 - Use explosion-proof electrical/ventilation/lighting/... equipment.
P261 - Avoid breathing dust/fume/gas/mist/vapour/spray.
P303+P361+P353 - IF ON SKIN (or hair): Remove contaminated clothing immediately. Rinse skin with water/shower.
P403+P233 - Store in a well-ventilated place. Store in tightly closed container.
P501B - Dispose of contents/container in accordance with local regulations.
EUH-phrases EUH066 - Repeated exposure may cause dry or cracked skin.
EUH208 - Contains . May cause an allergic reaction.
Pictograms GHS02 - flame
GHS07 - exclamation mark
UFI-code X1AM-E8TS-7003-AF4W
IMDG-code UN 1268, Petroleum products nos, 3, III, (36°Cc.c.)Transport in accordance with 2.3.2.5 of the IMDGcode