Rain Protect Liquid

Water-repellent and breathable coating

A solvent-free, odourless, colourless, water-repellent and breathable coating that protects all vertical exterior walls from rain penetration and dirt without changing the appearance of the wall.

  • Protects your walls against rain penetration and dirt
  • Does not change the appearance of the wall
  • Environmentally friendly and safe to use

Step-by-step plan

  1. First make sure the surface is free of dust. If the substrate is very dirty, clean it with a pressure washer.
  2. Remove any paint residue and salt crystals with a stiff brush.
  3. Treat green mould, lichens and algae with Garden Clean Green Remover.
  4. Seal cracks larger than 0.2 mm with colour-matched mortar or mastic and repair bad grouting.
  5. Make sure the substrate is reasonably dry before application. Shake well before use.
  6. Apply undiluted Rain Protect Liquid with a brush, roller or garden sprayer from top to bottom until the substrate is saturated.
  7. Apply to small areas and apply subsequent coats while still wet, with a maximum of 1 hour between coats. Rain Protect Liquid has a milky colour that becomes completely transparent as it dries.
  8. It can be overpainted with acrylic paint systems.

Calculate how much product you need

Step 1 of 2

  • cm
  • cm
* By using this calculation module, one agrees to the terms of use: All results are indicative and approximate only. Aquaplan can in no way be held responsible for deviating results resulting from the use of this calculation module.

Technical features

Dimensions 12 × 7,5 × 26,5 cm
Variation

Rain Protect Liquid 0.75 l SprayRain Protect Liquid 4 l + 25%Rain Protect Liquid 10 l + 25%

EAN

541346694807954134669440025413466944019

Volume

0.75512.5

Color

transparenttransparentTransparent

Content indication

LLL

Material

Silane-siloxaneSilane-siloxaneSilane-siloxane

Product use

Waterproof and protectWaterproof and protectWaterproof and protect

Required tools

brush, roller or sprayerbrush, roller or sprayerbrush, roller or sprayer

Minimum processing temperature

555

Maximum processing temperature

252525

Dry time (in hours)

111

Repaintable

TrueTrueTrue

Repaintable after (hours)

242424

Suitable for part of building

Interior walls, Outer wallsInterior walls, Outer wallsInterior walls, Outer walls

Safety features

H-phrases None
P-phrases None
EUH-phrases EUH208 - Contains . May cause an allergic reaction.
Pictograms None
UFI-code None
IMDG-code None