Groene Plak- Spijkerrol 10m
Bituminous top layer
Green Stick-Spijkerrol is a bituminous top layer for perfect, affordable and problem-free waterproofing. The top is finished with green slate chippings. This roof roll can be nailed or glued with Roof Glue
- Nailed and/or glued
- Top is finished with green slate granules
- Rot-proof and mould-free glass fleece inlay
Step-by-step plan 
Accessories 
Technical features 
Related products
Step-by-step plan
- Always work on a clean, even and dry substrate.
- Always provide a slope of at least 2 cm per metre of roof pitch to prevent the formation of puddles.
- With a new wooden roof structure, always work with a bottom and top layer and use waterproof sheets of min. 18 mm thick or impregnated wooden boards.
- Always work from the lowest point of the roof slope and install the underlay in scales with an overlap of 7 to 10 cm so that a homogeneous and waterproof roof covering is already obtained.
- Attach ROOF BASE FIX by nailing down all sides every 25 cm with ROOF NAILS.
- If you don’t have a wooden roof structure, you can glue the roofing. Apply one coat of ROOF GLUE to the substrate with a floor squeegee or brush. Place the roll in the glue and unroll it. Make sure the glue is spread over the entire width of the roll. If necessary, add some more glue.
- Seal the overlap with ROOF GLUE and nail it down every 15 cm with ROOF NAILS.
Documents
Accessories
Technical features
| Dimensions | 1000 × 100 × 0,2 cm |
|---|---|
| Variation | Roof Base Fix Green 10 m |
| EAN | 5420004306307 |
| Volume | 10 |
| Material | Oxydized bitumen |
| Product use | Waterproofing for flat and pitched roofs |
| Expected lifespan (in years) | 10 |
| Thickness (mm) | 2.2 |
| Width (mm) | 1000 |
| Surface area (m²) | 10 |
| Installation method | Glued, Mechanically fixed |
| Required tools | Floor squeegee or Hammer |
| Length (mm) | 10000 |
| Content indication | M²/Roll |
| Top finish | Green granules |
