Home Products EPDM roof Folies EPDM Rubber Roof per 0.5 m
0

EPDM Rubber Roof per 0.5 m

Your made-to-measure roof in one piece

EPDM Rubber Roof is the ideal roof covering for all flat and gently pitched roofs. It is suitable for both new builds and the renovation of existing roofs. EPDM roof covering is very easy to install, flexible and permanently elastic. This single-ply synthetic rubber can withstand extreme weather conditions. The EPDM membrane is cut to size and delivered in one piece.

  • Easy to install, both for professional and DIY roofers
  • Root-resistant, suitable for green roofs
  • Flexible and permanently elastic
Find points of sale

Step-by-step plan

  1. Lay the EPDM membrane on the roof surface and let it rest for a few hours, ensuring the membrane is evenly distributed. Then fold the membrane back in half.
  2. Apply Flexifoil Surface Adhesive to the exposed part of the roof surface, up to 15 cm from the roof edge or wall. Spread the adhesive by pouring it while making serpentine movements (maximum 8 cm spacing). For small areas (<15 m²), you can apply Flexifoil Details & Seams in stripes. Repeat this for the other side. Use EPDM special primer when placing EPDM membrane on an existing roof covering or a concrete substrate.
  3. Bond the edges with Flexifoil Edge Adhesive, applying the adhesive to all surfaces. When the adhesive is finger-dry, carefully fold the EPDM membrane into place and press with an EPDM pressure roller.
  4. Fold the membrane at the corners to form a pocket, then fold it flat over the roof edge and finish with roof edge profiles. You can also use pre-formed EPDM corner pieces.
  5. Seal the overlapping zones with Flexifoil Overlap. Fold the EPDM membrane back 10 cm at the seam. Keep the outer 2 cm free and apply adhesive to the remaining 8 cm of this flap with a brush. Carefully fold the membrane back and press well with a hand roller. Make the seam extra waterproof by bonding the remaining 2 cm strip with Flexifoil Details & Seams. Press this down firmly and ensure adhesive comes out from beneath the seam for additional waterproofing.
  6. Finish roof details such as chimneys or drains with Flexifoil Details & Seams and a caulking gun. Determine where a rainwater drain will be placed and cut this section out. Always use pre-formed EPDM pieces and pre-formed drains. Ensure adhesive comes out from beneath the seams for additional waterproofing.

Documents

Manual

Calculate how much product you need

Step 1 of 2

  • cm
  • cm
  • cm
  • cm
  • cm
  • cm

  • * 20 cm overlap is added automatically

  • Accessories

    Rainwater drainage around indoor/vertical
    Rain Drain round internal/vertical 75 mm
    Rain Drain round internal/vertical 63 mm
    Rain Drain round internal/vertical 90 mm
    Rainwater drainage / horizontal city outlet 90° or 45°
    EPDM Rainwater Drain Horizontal 90°
    Rainwater Drain EPDM H spigot outlet 45°/6 x 8 cm
    Rainwater Drain EPDM H spigot outlet 45°/6 x 8 cm
    Corner piece external corner 90° (e.g. chimney)
    EPDM Outside Corner 90° - 150 mm
    EPDM Outside Corner 90° - 500 mm
    Corner piece external corner 45° (e.g. skylights)
    EPDM Outside Corner 45° - 150 mm
    Universal cuff / roof gland
    EPDM Rubber Roof per 0.5 m
    Roofing
    Edge Trim 60 x 45 mm length 2 m
    Black Edge Trim
    Aluminium Outside Corner
    Aluminium Flashing Profile
* By using this calculation module, one agrees to the terms of use: All results are indicative and approximate only. Aquaplan can in no way be held responsible for deviating results resulting from the use of this calculation module.

Technical features

Dimensions 70 × 50 × 0,1 cm
Variation

EPDM Rubber Roof per 0,5m x 0,7mEPDM Rubber Roof per 0,5m x 1,4mEPDM Rubber Roof per 0,5m x 2,8mEPDM Rubber Roof per 0,5m x 3,5mEPDM Rubber Roof per 0,5m x 4,2mEPDM Rubber Roof per 0,5m x 5,6mEPDM Rubber Roof per 0,5m x 7m
EAN

5413466942800541346694164354134669416505413466941667541346694167454134669416815413466941698
Volume

1111111
Material

EPDMEPDMEPDMEPDMEPDMEPDMEPDM
Product use

Waterproofing for flat roofsWaterproofing for flat roofsWaterproofing for flat roofsWaterproofing for flat roofsWaterproofing for flat roofsWaterproofing for flat roofsWaterproofing for flat roofs
Expected lifespan (in years)

40404040404040
Thickness (mm)

1111111
Width (mm)

500500500500500500500
Surface area (m²)

0.350.71.41.752.12.83.5
Installation method

GluedGluedGluedGluedGluedGluedGlued
Required tools

Pressure Roller, Corner Roller, ScissorsPressure Roller, Corner Roller, ScissorsPressure Roller, Corner Roller, ScissorsPressure Roller, Corner Roller, ScissorsPressure Roller, Corner Roller, ScissorsPressure Roller, Corner Roller, ScissorsPressure Roller, Corner Roller, Scissors
Length (mm)

700140028003500420056007000
Content indication

Stuk(s)Stuk(s)Stuk(s)Stuk(s)Stuk(s)Stuk(s)Stuk(s)